|
|
|
|
|
|
|
Sometimes a customer has already purchased mobile devices and would like to use them with AssetTrack. If it's a device that doesn't appear on our supported device list, then most likely you will not be able to install or run AssetTrack on it. Such devices must first go through an AMI certification process before it can be used with AssetTrack.
If you are interested in using a device that isn't on the list below, please inquire with your AMI representative about having a device certified for AssetTrack. For certification, our general requirements are:
Component | Requirements |
Operating System | Windows Mobile 6.5 or better (recommended) |
Memory | >= 128MB onboard |
Scanner | A laser or imager for scanning barcodes is required. |
For almost all devices, AssetTrack requires an add-on memory card for storage purposes. AMI recommends the following:
Depending on the model of device, you will need an SD card or microSD card. They're not interchangeable so you need to be sure to purchase the correct card for your device. Contact AMI Support if you're not sure. |
Motorola officially recommends the ATP industrial-grade card, which allows them to command a premium price. Specifically, they are certified to withstand higher levels of humidity, shock, vibration, and temperature. Some customers desire this extra level of robustness, but many others eschew it in favor of less expensive consumer-grade cards. |